PROJECT F ® - NanoXPRESS - Quick Nano Coating

Properties of NanoXPRESS - Quick Nano Coating:

• A premium nano polymer protective coating with strong water-repellent effects. When applied using Crosslinking technology, which is a process where one polymer chain is linked to another, typically through covalent or ionic bonds, it creates a protective film.
• Crosslinking increases the hardness and durability of the paint surface against mechanical damage. This means that the car's paint is better protected from scratches, small stones, and other physical impacts that could cause damage.
• The polymer coating provides excellent protection against harmful UV radiation. UV radiation can cause fading and degradation of the paint, but the protective coating from crosslinking polymers minimizes these effects by blocking the penetration of UV rays.
• Such a protective coating is resistant to various chemicals and pollutants, such as acid rain, road salts, bird droppings, and insects. These substances can be very aggressive towards the paint, but the polymer coating effectively repels them and prevents their penetration into the paint.
• Application results in excellent hydrophobic properties, meaning the polymers repel water. Water and other liquids do not stay on the paint surface but form beads that easily roll off. This effect not only keeps the car cleaner but also prevents the formation of water spots and mineral deposits.
• Using NanoXPRESS provides the car's paint with a smooth and mirror-like finish, enhancing the car's aesthetic appearance and improving its overall visual impression.

NanoXPRESS can be used on various surfaces such as paint, plastics, glass, wraps, or protective films. The pleasant cherry scent ensures an enjoyable application experience. NanoXPRESS provides protection for 6 to 12 months, depending on various factors.

Instructions for Use:

1. Wash the vehicle as usual.
2. Work in the shade and on a surface cool to the touch.
3. Spray the product on the treated area from a distance of approximately 20 cm.
4. Work section by section.
5. Use quick movements with a microfiber cloth to achieve a shine.
6. Do not allow the product to dry.
7. After application, avoid contact with water and chemicals for at least 24 hours.
8. For longer-lasting protection, regularly treat with Project-F - SlickLOOK.

Tip for Quick Protection When Washing Your Vehicle with More Efficient Drying of the Body Surface:

If you want to save time during application and drying of the vehicle, NanoXPRESS can also be applied to a wet surface. The advantage is faster application, but it results in increased product consumption and reduced durability. This method can be used, for example, on wheel rims and other complex shapes. This way, you save time and make your work more efficient:

1. Shake well before use.
2. Work in the shade and on a clean surface cool to the touch.
3. Spray the product on the washed, treated, still wet area from a distance of approximately 20 cm.
4. Wait a few seconds for the product to bind.
5. Rinse with higher water pressure.
6. Dry the surface using a PROJECT-F - PerfectDRY or PROJECT-F - PuffedDRY drying towel.

Important! Keep out of reach of children. Do not expose to frost. Store at room temperature. Do not expose to frost.

Volume: 200 ml, 500 ml

pH: 2.5-3.0

Country of Origin: Slovak Republic